Types by Structure

Rubber Hydraulic Hoses by the structure of the reinforcement

 

Textile Braided Hoses

  • Commonly used as low-pressure hoses
  • No impulse-test requirements for 1TE and R6
  • 2TE impulse-test requirements ISO 6803 125% of WP, 100.000 cycles at 100°C
  • 3TE and R3 impulse-test requirements ISO 6803 133% of WP, 1” and above 100% of WP, 200.000 cycles at 100°C
textile braided hose
of

 

description ISO   SAE International
1 textile braid ISO 4079 Type 1 EN 854 R6 SAE 100R6
2 textile braid ISO 4079 Type 3 EN 854 R3 SAE 100R3
2 textile braid + steel spiral     SAE 100R4
2 textile braid ISO 4079 Type 2 EN 854 2TE  
3 textile braid ISO 4079 Type 4 EN 854 3TE  

 

 

 

Steel Wire Braided Hoses

 

 

  • 1SN acc. to EN 853, 1 wire-braid hoses, impulse-test requirements ISO 6803 125% of WP up to 1”, above 1” 100% of WP, 150.000 cycles at 100°C
  • High-temperature version available
steel wire braided hose
of

 

 

  • 2SN acc. to EN 853, 2 wire-braid hoses, impulse-test requirements ISO 6803 133% of 200.000 cycles at 100°C
  • High-temperature version available
steel wire braided hose
of

 

  • 1SC acc. to EN 857, 1 wire-braid compact hoses, impulse-test requirements ISO 6803 125% of WP, 150.000 cycles at 100°C
steel wire braided hose
of

 

 

  • 2SC acc. to EN 857, 2 wire-braid compact hoses, impulse-test requirements ISO 6803 133% of WP, 200.000 cycles at 100°C
steel wire braided hose
of

 

 

  • Special constructions such as 2SC HP and 2SC Plus MSHA available, exceeding EN 857, as well available in flame resistant MSHA cover and high abrasion resistant (HA) version
steel wire braided hose
of

 

description ISO   SAE International
1 wire braid Thick cover ISO 1436-1 Type 1A EN 853 1ST SAE 100R1A
2 wire braid Thick cover ISO 1436-1 Type 2A EN 853 2ST SAE 100R2A
1 wire braid Thin cover ISO 1436-1 Type 1AT EN 853 1SN SAE 100R1AT
2 wire braid Thin cover ISO 1436-1 Type 2AT EN853 2SN SAE 100R2AT
Compact 1 wire braid ISO 11237-1 Type R17   SAE 100R17
Compact 2 wire braid ISO 11237-1 Type R16   SAE 100R16
Compact 1 wire braid ISO 11237-1 Type 1SC EN 857 1SC  
Compact 2 wire braid ISO 11237-1 Type 2SC EN 875 2SC  

 

 

Steel Spiral Hoses

 

 

  • 4SP acc. to EN 856, 4-layer spiral hose, impulse-test requirements ISO 6803, 133% of WP, 400.000 cycles at 100°C
steel spiral hose
of

 

  • 4SH acc. to EN 856, 4-layer spiral hose, impulse-test requirements ISO 6803 133% of WP, 400.000 cycles at 100°C
steel spiral hose
of

 

  • Special construction 4SH Plus MSHA available, exceeding EN 856, as well available in flame resistant MSHA cover and high abrasion resistant (HA) version
steel spiral hose
of

 

 

  • R12 acc. to EN 856, 4-layer spiral hose,impulse-test requirements ISO 6803 133% of WP, 500.000 cycles at 120°C, flame resistant MSHA cover, as well available in high abrasion resistant (HA) version
steel spiral hose
of

 

 

  • R13 acc. to EN 856, 4-layer spiral hose, 1.1/4” and above 6-layer spiral hose, impulse-test requirements ISO 6803 120% of WP, 500.000 cycles at 120°C, flame resistant MSHA cover, as well available in high abrasion resistant (HA) version
steel spiral hose
of

 

 

  • R12, R13 hoses acc. to EN 856 are originally specified in SAE as SAE 100 R12, SAE 100 R13
steel spiral hose
of

 

 

  • R15, not yet specified in EN or SAE,4- or 6-layer spiral hose based on R13 construction, but providing 420 Bar, same test-requirements as R13, flame resistant MSHA cover, as well available in high abrasion resistant (HA) version
steel spiral hose
of

 

description ISO   SAE International
4 spiral ISO 3862-1 Type 4SP EN 856 4SP  
4 spiral ISO 3862-1 Type 4SH EN 856 4SH  
4 spiral ISO 3862-1 Type R12 EN 856 R12 SAE 100R12
4 or 6 spiral ISO 3862-1 Type R13 EN 856 R13 SAE 100R13
6 spiral ISO 3862-1 Type R15* EN 856 R15* SAE 100R15*

 

 

Thermoplastic Hydraulic Hoses

 

 

  • SAE 100 R7 (EN 855 has been withdrawn), 1 textile-braid, low- and medium-pressure hose, impulse-test requirements ISO 6803 125% of WP, 150.000 cycles at 100°C
  • Available in black and orange cover, as well as single or twin-line hoses
thermoplastic hose
of
thermoplastic hose
of

 

  • SAE 100 R8 (EN 855 has been withdrawn), 1- or 2- textilebraid, high-pressure hose, impulse-test requirements ISO 6803 133% of WP, 200.000 cycles at 100°C
  • Available in black and orange cover, as well as single or twin-line hoses
thermoplastic hose
of
thermoplastic hose
of

 

description ISO   SAE International
1 Synthetic braid ISO 3949-1 EN 855 R7* SAE 100R7
1 or 2 Synthetic braid ISO 3949-2 EN 855 R8* SAE 100R8
1 wire braid - 3000 PSI constant pressure     SAE 100R18

 

*Withdrawn